:	May 17, 2004

.

: Do not work on or under a vehicle supported only by a jack. Always support the vehicle on safety stands. Raise and support the vehicle.

.	Disconnect the battery ground cable.

.

Remove the accessory drive belt.

.

Remove the front wheel.

.

Remove the splash shield.

.

Remove the generator splash shield.   Remove the 4 clips.

.

Remove the battery positive cable.   Release the battery positive cable cover.   Remove the retaining nut.   Disconnect the generator electrical connectors.

.

Remove the generator.   Remove the 3 bolts.

.

Install the battery positive cable.   Connect the battery positive cable.   Tighten the retaining nut to 10 Nm (7 lb.ft).   Connect the generator electrical connector.

.

Install the generator.   Tighten the 3 bolts to 48 Nm (35 lb.ft).

.

Install the generator splash shield.

.

Install the splash shield.

.

Install the front wheel.   Tighten the wheel nuts to 140 Nm (103 lb.ft).

.

Install the accessory drive belt.

.

Connect the battery ground cable.

.

Lower the vehicle.